Raydafon Technology Group Co.,Limited
Raydafon Technology Group Co.,Limited
Products
T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers

T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers

T designs 45 degree field bins Auger Gearboxes for grain handling augersGear ratio: 2:1 reductionPower rating:16HP (11.8KW) @ 540 rpm24HP (18KW) @ 1000 rpmInput torque:208NM @ 540 rpm172NM @ 1000 rpmOutput torque:416NM @ 540 rpm344NM @ 1000 rpmUnit weight: 17kgMounting: 4 x holes at 88mm centresShaf......

T designs 45 degree field bins Auger Gearboxes for grain handling augers

T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers

Gear ratio: 2:1 reduction

Power rating:

16HP (11.8KW) @ 540 rpm

24HP (18KW) @ 1000 rpm

Input torque:

208NM @ 540 rpm

172NM @ 1000 rpm

Output torque:

416NM @ 540 rpm

344NM @ 1000 rpm

Unit weight: 17kg

Mounting: 4 x holes at 88mm centres

Shafts: 30mm diameter with 8mm key.

Lubricant: SAE 90 EP gear oil

 

T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers
GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice

CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014

SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.

POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working conditions are different,please contact LongQuan technical department.

LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.
T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers
 

Related Products
T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers

Factory

T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers

Extensive use for agricultural machines
Guarantee: High precision, high wear resistance, low noise, smooth and steady, high strength


Our factory
T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers
 
 
 
Hot Tags: T Designs 45 Degree Field Bins Auger Gearboxes for Grain Handling Augers, Pto Gearbox, Agriculture Gearbox
Send Inquiry
Contact Info
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept