Stainless steel bushing steel chain is very suitable for operation in extremely rough or worn conditions. This type of chain is often referred to as "steel bushing" or "no roller". Each part is machined and heat treated to achieve the effect of strength and wear and ensure the best fit of pin and bushing. The sidebar is used to accommodate the ends of the pins, which are locked in the position in the sidebar and will not rotate during operation.
The materials used have been carefully selected. The pin is an alloy steel containing nickel, chromium, and molybdenum. Through its higher fatigue resistance, higher wear resistance, and improved tensile strength at high and low temperatures, the chain life is improved. These factors provide high-quality products for conveyor belts and elevator services, applicable to gravel, abrasive, and fine particle materials, such as ash, crushed coal, soda ash, cement, crushed stone, and gravel.
• Pitch range: 2.609-7.000"
• Average ultimate strength: 25000-200000 pounds
• Maximum. Record working load: 2750-27500 pounds
Provide various accessories. All cotton chains use T-shaped cotton. Unless riveting is required, a grooved structure will be provided. The stainless steel bushing steel chain is manufactured according to the manufacturer's standards and can be interchanged with the standard bushing steel chain of other manufacturers. Sprockets can be made of cast steel and manufactured when required.

hain No.	Pitch	A	B	T
SS188-G19	2.609	2.25	1.00	0.25
SS102B-G19	4.000	3.06	1.50	0.38