Professional Manufacture Bushed / Taper Lock Sprocket in Steel and Stainless Steel

Professional Manufacture Bushed / Taper lock sprocket in steel and stainless steel

Tapered locking sprockets are used on various machines and vehicles. These essential components help drive the mechanism and are secured to the shaft by tapered bushes.
There are many different types of tapered locking sprockets with different chain pitches and numbers of teeth. Choosing the right type is critical to your particular application. As an expert on these sprockets, our job is to help you ensure that you get the tapered bushing sprockets you need.
How to Install the Taper Lock Sprocket
Clean and remove the oil stains on the middle hole of the tapered bushing, the outer surface of the inner race, and the inner race of the sprocket. Insert the tapered bushing into the sprocket (pay attention to aligning the half-threaded hole with the half-unloading hole)
Coat hexagon socket head screws with engine oil and screw them into the threads, but do not tighten them;
Clean and remove the oil stain on the shaft surface, and install the sprocket and tapered bushing in the correct position together
When using the key, first install the key into the keyway
Use a hexagon socket torque wrench (dn911) to gradually tighten the hexagon socket head screws according to the torque shown in the table below
After the load runs for some time (about half an hour), check and ensure that the screws can still work under the appropriate tightening torque;
To avoid ash, all gaps shall be filled with grease.
Sprocket quality testing Multiple processing methods
other sprockets
We also provide various chains