Latest Design Bucket Elevator Chain and Sprocket in Steel and Stainless Steel

Latest Design Bucket elevator chain and sprocket in steel and stainless steel

A bucket elevator is suitable for lifting from a low place to a high place. After the supplied materials are put into the hopper through the vibration table, the machine will automatically and continuously run and convey upward. The conveying speed can be adjusted according to the conveying volume, and the lifting height can be selected according to the needs. The hopper is designed and manufactured by us. PP non-toxic hopper makes bucket elevators more widely used. All dimensions are designed and manufactured according to actual needs. It is used to support vertical packaging machines and computer measuring machines and is suitable for lifting and feeding food, medicine, industrial chemical products, screws, nuts, and other products; The automatic stop and start of the machine can be controlled through the signal recognition of the packaging machine.


Working principle of bucket elevator
Bucket elevator chain wheel
The hopper scoops out the material from the warehouse below. When the belt or chain is lifted to the top, it will bypass the top pulley and rotate downward. The bucket elevator pours the material into the receiving tank. The drive belt of a bucket elevator usually adopts the rubber belt installed on the lower or upper drive roller and the upper and lower steering rollers. Chain-driven bucket elevators are typically equipped with two parallel drive chains, with a pair of drive sprockets at the top or bottom and a pair of steering sprockets at the bottom or top. Bucket elevators usually have enclosures to prevent dust from flying into bucket elevators.
Bucket elevator: suitable for lifting from low to high. After the supplied materials are put into the hopper through the vibration table, the machine will automatically and continuously run and convey upward.Characteristics of bucket elevator chain wheel
Forged from high-quality alloy steel with high strength and stable performance
The sprocket tooth surface is heat treated and has high hardness. It is not easy to deform after long-term use.
The connecting rod can pass in and out of the slot smoothly, running smoothly and reducing the occurrence of faults.
Various models and specifications can be freely selected according to actual needs, and customization is supported.
other sprockets