Cast Iron 540 Rpm Gear Transmission Three-Point Hitch Rotary Harrow Gearbox

Cast iron 540 rpm Gear Transmission Three-point hitch Rotary Harrow GearboxRotary HarrowProfessional rotary harrow, gear transmission, 2 blades per rotor.STANDARD FEATURES: Three-point hitch, category 1. Cast iron gearbox 540 rpm.Blades Gear driven in oil bath.Two blades per rotor. Self-adjusting si......

Send Inquiry

Product Description

Cast iron 540 rpm Gear Transmission Three-point hitch Rotary Harrow Gearbox

Rotary Harrow

Professional rotary harrow, gear transmission, 2 blades per rotor.

STANDARD FEATURES:

Three-point hitch, category 1.
Cast iron gearbox 540 rpm.
Blades Gear driven in oil bath.
Two blades per rotor.
Self-adjusting side protection.
Mounting points for roller.
Mounting points for levelling blade.
Mounting points for seeder.
Universal PTO shaft, category 4, with shear bolt.

Convenient, length-adjustable tractor attachment with horizontal compensation between tractor and rotary harrow
High quality VN-change-speedgearbox with PTO shaft drive as standard
Twin gearbox pan with maximum stability and stone guard as standard
Maintenance-free taper roller bearing
Circular rotors for screwed-on tines, optional tine quick changeover system
Levelling bar with automatic height adjustment

Hot Tags: rotary harrow gearbox, China, suppliers, manufacturers, factory, wholesale, buy, made in China

GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice

CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014

SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.

POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working conditions are different,please contact LongQuan technical department.

LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.

Cast Iron 540 Rpm Gear Transmission Three-Point Hitch Rotary Harrow Gearbox

Cast iron 540 rpm Gear Transmission Three-point hitch Rotary Harrow Gearbox

Rotary Harrow

Related Products Factory

Related Products

Factory