86435 Left/Right Trailer Brake 10′ Electric Brake

86435 Left/Right Trailer Brake 10′ Electric Brake

Electric brakes are currently a valuable alternative to brake drums. Electric brakes are the most common braking system installed on trailers. Electronic brakes require the installation of a controller on the vehicle to transmit power to ensure braking occurs correctly. There is a magnet on the inner side of the back panel and two wires on the top, which can be directly wrapped in the trailer wires. When energized, it magnetizes the brake magnet, which is attracted to the surface of the brake drum. When it comes into contact with the area, the friction causes the brake drum to rotate, moving the actuator arm and pushing the brake shoes out of the brake drum, causing the wheels to stop rotating. There is a unique brake pad material on the brake shoes that can resist the heat generated by friction. The electric brake is stable and does not jerk, without any impact or jerk related to a disconnection between the electronic brake and the regular hydraulic brake. Compared with general mechanical friction braking, electric braking also has a fast speed.
Universal electric trailer brake - Universal 10 "x 2-1/4" trailer electric brake assembly for 3500 pounds Al-ko, dexter, Lippert, Rockwell, and premium trailer axles, including free hardware
Size -10 "diameter x 2-1/4" width, 4 "bolt circle, center hole diameter 3"
Including hardware -4 hole installation. Equipped with mounting nuts and lock washers
Including brake - electric trailer brake assembly 1 right side
Capacity -3500 pounds axle

(1) Magnet
(2) Return spring
(2) Compression spring
(2) Show primary and secondary linings
(1) Regulator
(1) Adjuster spring

Certificates and Honors